(949) 587-0400
Celectronics
Compatible Electronics

Pre-Compliance & EMC Consulting Services — Design Review, Troubleshooting & Regulatory Strategy

Pre-Compliance & EMC Consulting Services

Compatible Electronics offers a complete suite of pre-compliance testing, design review, troubleshooting, and EMC consulting services — all grounded in 40+ years of hands-on compliance testing experience and delivered from the same NVLAP accredited laboratory infrastructure used for formal certification. Testing and consulting under one roof, at three Southern California locations.

NVLAP Accredited Lab Equipment 40+ Years Experience 3 SoCal Locations Testing + Consulting

The Testing + Consulting Advantage

The most valuable aspect of Compatible Electronics' pre-compliance and consulting services is that they are delivered by the same engineers who run formal NVLAP accredited compliance tests in our CISPR chambers every day. Our consultants know what the test equipment actually measures, which design patterns consistently fail specific tests, and which regulatory interpretations are accepted by FCC and EU market surveillance authorities in practice — not just in theory.

This direct connection between engineering consulting and accredited testing means that every recommendation we make can be immediately validated by pre-compliance testing at the same location, and that the path from early-stage consulting through pre-compliance work to formal certification is seamless — same lab, same engineers, same equipment throughout.

🔬

Lab-Grounded Advice

Recommendations based on direct observation in our NVLAP accredited test chambers — not textbook theory.

🔄

Seamless Consulting-to-Certification Path

From design review through pre-compliance to formal ILAC MRA recognized certification — same location, same engineers.

⚡

Immediate Fix Validation

Consulting recommendations validated by pre-compliance testing on the same day at the same Southern California location.

🌍

Multi-Market Expertise

FCC, CE marking, ISED Canada, RCM, VCCI, KC — compliance strategy grounded in real accreditation experience across all major markets.

Pre-Compliance & Consulting Services

Four complementary services covering every phase of the product compliance lifecycle — from first prototype through post-failure recovery:

01
NVLAP Lab Equipment · Engineer Present · Same-Day

Pre-Compliance EMC Testing Services for Product Development & Certification Readiness

Engineering-use EMC evaluation using our actual NVLAP accredited CISPR chambers, calibrated LISNs, and IEC 61000-4 series test instruments — radiated and conducted emissions pre-scans, immunity pre-assessments, near-field source identification, and in-session fix verification. The most accurate pre-compliance data available, directly comparable to formal compliance results.

  • Radiated emissions pre-scan in CISPR semi-anechoic chamber — 30 MHz to 1 GHz (to 6 GHz for high-speed interfaces)
  • Conducted emissions pre-scan: 150 kHz–30 MHz via calibrated LISN
  • Full IEC 61000-4 series immunity pre-assessments — ESD, radiated RF, EFT/Burst, surge, conducted RF
  • Near-field H/E-field probing and current probe diagnostics for emission source identification
  • Standards targeting: FCC Part 15B, EN 55032, EN 55011, EN 55015, IEC 60601-1-2, IEC 61326-1, EN 50130-4
  • Results for engineering use only — seamless transition to formal accredited testing
Learn More →
02
Written Report · Prioritized Findings · Standards-Referenced

EMC Design Review Services for Schematics, PCB Layouts & Compliance Risk Reduction

Expert evaluation of schematics, PCB layouts, and enclosure designs — performed before hardware fabrication to identify EMC issues at the lowest possible cost. Each finding is prioritized by severity, referenced to the applicable standard clause, and accompanied by a specific mitigation recommendation. Grounded in direct observation of what causes real products to fail in our accredited test chambers.

  • Schematic-level analysis: switching PSU topology, clock architecture, PDN design, filter and ESD protection
  • PCB layout analysis: stackup, ground planes, decoupling placement, high-speed routing, chassis bonding
  • Written report: executive summary, Critical/Significant/Advisory severity ranking, annotated design excerpts
  • Standards-referenced findings: FCC Part 15, EN 55032, IEC 61000-4 series, IEC 60601-1-2, IEC 61326-1
  • Findings immediately validatable by pre-compliance testing at the same location
  • Note: CETCB personnel cannot simultaneously provide design review and TCB services
Learn More →
03
Emissions & Immunity · In-Session Fix Verification · On-Site Available

EMC Troubleshooting & EMI Debugging Services for Emissions and Immunity Test Failures

Fast, systematic root cause identification for EMC test failures using NVLAP accredited diagnostic equipment — near-field probing, RF current probes, spectrum analyzer diagnostics, and targeted IEC 61000-4 immunity injection. Candidate fixes evaluated and verified during the troubleshooting session. Same-lab advantage: our troubleshooters know exactly what the formal test equipment measured when your product failed.

  • Emissions diagnostics: near-field H/E probing, current probe, LISN conducted analysis, spectrum analyzer
  • Immunity diagnostics: RF injection (IEC 61000-4-6 method), ESD spot testing, EFT/Burst port isolation
  • Structured 5-step methodology: characterize → hypothesize → measure → mitigate → verify
  • Resolves: FCC/EN 55032 radiated, EN 55015 conducted, IEC 61000-4-2/3/4/5/6/11 immunity failures
  • In-session fix verification — candidate solutions measured and confirmed before you leave
  • Available at our lab or on-site at your facility
Learn More →
04
Multi-Market Strategy · FCC · CE Marking · Medical · Industrial

EMC Design Consulting Services for Regulatory Compliance & Multi-Market Certification

Comprehensive EMC engineering consulting from concept through certification — regulatory roadmaps, standards interpretation, compliance strategy, PCB design guidance, and multi-market coordination. Grounded in 40+ years of direct product testing experience across FCC, CE marking, IEC 60601-1-2, IEC 61326-1, and international compliance programs. Project-based, retainer, training, and expert witness engagements available.

  • Compliance roadmaps: all applicable requirements for all target markets identified upfront
  • Multi-market coordination: FCC + CE + ISED + RCM + VCCI + KC — one program, maximized data reuse
  • Medical device: IEC 60601-1-2 Ed. 4 for FDA 510(k), EU MDR, and international submissions
  • Industrial: IEC 61326-1 and EN 61000-6-3/6-4 strategy for US, EU, and multi-market launches
  • Engagement models: project-based, retainer, training workshops, expert witness
  • Note: CETCB personnel cannot simultaneously provide consulting and TCB services
Learn More →

Where Each Service Fits in Your Product Lifecycle

Our four pre-compliance and consulting services are designed to work together — or independently — at every stage of product development:

Concept & Architecture
EMC Design Consulting
Regulatory roadmap, standards selection, architecture risk review
→
Schematic & Layout
EMC Design Review
Schematic + PCB layout review before fabrication
→
Prototype & Development
Pre-Compliance Testing
Emissions pre-scans, immunity pre-assessments, near-field probing
→
After Test Failure
EMC Troubleshooting
Root cause diagnosis, fix verification, path back to compliance
→
Formal Certification
Full Compliance Testing
NVLAP accredited · ILAC MRA recognized · CE marking · FCC

Industries & Markets We Support

💻Consumer Electronics & IoT
🏭Industrial & Automation
🏥Medical Devices (IEC 60601-1-2)
🌐Information Technology
💡Lighting Equipment (EN 55015)
⚡Power Electronics & EV Charging
📡Telecommunications
🔐Security & Alarm Systems
🇺🇸 FCC Part 15 🇪🇺 CE Marking 🇨🇦 ISED Canada 🇦🇺 RCM 🇯🇵 VCCI 🇰🇷 KC 🇹🇼 BSMI

Why Choose Compatible Electronics?

✓

NVLAP Accredited Lab Equipment

Pre-compliance uses the same CISPR chambers, LISNs, and IEC 61000-4 instruments as formal certification — not consumer-grade alternatives.

✓

40+ Years Experience

Engineers who have tested and consulted on thousands of products across every major EMC standard and regulatory market.

✓

Testing + Consulting Under One Roof

Consulting advice grounded in what we observe in our accredited chambers — validated by pre-compliance testing at the same location.

✓

3 Southern California Locations

Lake Forest/Silverado (949-587-0400) · Brea (714-579-0500) · Newbury Park (805-480-4044) — flexible scheduling.

✓

Seamless Path to Certification

From design review through pre-compliance to NVLAP accredited ILAC MRA recognized test reports — same lab throughout.

✓

Direct Engineer Access

Responsive, accessible team — practical advice without long consulting firm queues. NVLAP Lab Code 200527-0.

Ready to Get Started?

Contact us for pre-compliance testing, design review, troubleshooting, or EMC consulting — same-day scheduling available at three Southern California locations.

📋 Request a Quote 📞 Call 949‑587‑0400

Brea: 714‑579‑0500 · Newbury Park: 805‑480‑4044

www.celectronics.com

Consulting

Ready to

get started?

Contact Us